Choosing the right evaporative cooler
Buying Guide 7 min read

Choosing the Right Evaporative Cooler

A practical guide to selecting the evaporative cooler that best fits your space, climate, and cooling needs.

Selecting the right evaporative cooler is not simply a matter of picking the largest unit available. The right cooler depends on the size of the space you need to cool, the climate in your area, how the space is ventilated, and how you plan to use the cooler.

This guide walks through the key factors to consider so you can make a confident, informed decision.

Understanding CFM and Cooling Capacity

The most important specification for any evaporative cooler is its airflow rating, measured in cubic feet per minute (CFM). CFM tells you how much air the cooler can move through the cooling media in one minute.

To determine the CFM you need, use this general formula: multiply the square footage of the space by the ceiling height to get the cubic footage, then divide by two. This gives you the minimum CFM needed to achieve roughly one complete air change every two minutes, which is the standard recommendation for effective evaporative cooling.

CFM Formula

CFM needed = (Square Footage × Ceiling Height) ÷ 2

Examples:

  • A 500 sq ft room with 8 ft ceilings: (500 × 8) ÷ 2 = 2,000 CFM minimum
  • A 1,500 sq ft open floor plan with 10 ft ceilings: (1,500 × 10) ÷ 2 = 7,500 CFM minimum
  • A 5,000 sq ft warehouse with 16 ft ceilings: (5,000 × 16) ÷ 2 = 40,000 CFM minimum

Climate and Humidity Considerations

Evaporative cooling works best when relative humidity is below 60 percent. In very dry climates — typically below 30 percent humidity — evaporative coolers can achieve temperature drops of 20 degrees Fahrenheit or more. If you are new to evaporative cooling, our article on How Does Evaporative Cooling Work? explains the science behind humidity and cooling performance.

As humidity rises, the cooling effect diminishes. In areas with seasonal humidity variation, an evaporative cooler may be highly effective during spring and early summer but less so during monsoon season. Understanding your local climate patterns helps you set realistic expectations.

  • Below 30% humidity: excellent cooling performance, 15–25°F temperature drop
  • 30–50% humidity: good cooling performance, 10–15°F temperature drop
  • 50–60% humidity: moderate cooling, 5–10°F temperature drop
  • Above 60% humidity: limited effectiveness, consider supplemental cooling

Types of Evaporative Coolers

Evaporative coolers come in several configurations, each suited to different applications and installation requirements.

Portable Evaporative Coolers

Portable units on casters can be moved from room to room or used in different locations as needed. They are ideal for spot cooling, supplemental cooling in specific areas, or situations where permanent installation is not practical. Portable coolers are popular for garages, workshops, patios, and smaller indoor spaces.

Window-Mounted Evaporative Coolers

Window units are installed in a window opening and draw outside air through the cooling media before delivering it into the room. They are a cost-effective option for cooling individual rooms and are commonly used in residential applications in dry climates.

Rooftop (Ducted) Evaporative Coolers

Rooftop units are installed on the roof and connected to the home or building's ductwork, providing whole-house or whole-building cooling. These are the most common configuration for residential whole-home cooling in the American Southwest.

Industrial and Commercial Evaporative Coolers

Large-capacity industrial coolers are designed for warehouses, manufacturing facilities, distribution centers, and other large open spaces. These units move very high volumes of air and are typically mounted on walls, posts, or mobile frames.

Ventilation: The Often-Overlooked Factor

Unlike air conditioning, which recirculates the same air in a sealed space, evaporative cooling works by continuously introducing fresh outside air into the space. For this to work effectively, the cooled air must have a way to exit — through open windows, doors, vents, or exhaust fans.

A common mistake is running an evaporative cooler in a tightly sealed space. Without adequate exhaust, humidity builds up rapidly and the cooling effect diminishes. As a general rule, open windows or vents on the opposite side of the space from the cooler to create a cross-ventilation path.

For whole-house systems, a qualified HVAC professional can help design the right ventilation strategy to maximize cooling performance.

Cooling Media: What to Look For

The cooling media — the evaporative pads inside the cooler — plays a critical role in cooling performance. Higher-quality media provides greater surface area for evaporation, absorbs water more effectively, and lasts longer before needing replacement.

When evaluating a cooler, consider the type of media it uses and how readily replacement media is available. Cellulose and rigid media generally offer better performance and longer service life than basic aspen fiber pads. Read our full guide on Understanding Cooling Media to learn more, or browse Media Replacement Kits and Bulk Cooling Media on our Products page.

Residential vs. Commercial Applications

Residential evaporative coolers are designed for home use, with features like quiet operation, programmable controls, and aesthetics that fit home environments. They are typically sized for individual rooms or whole-house cooling via ductwork.

Commercial and industrial coolers prioritize high airflow capacity, durability, and ease of maintenance over aesthetics. They are built to operate continuously in demanding environments and are sized for large open spaces rather than individual rooms.

Quick Selection Checklist

  • Calculate the CFM needed for your space (square footage × ceiling height ÷ 2)
  • Check your local average humidity levels during the cooling season
  • Determine whether you need portable, window, rooftop, or industrial cooling
  • Plan for adequate ventilation — open windows or vents on the opposite side of the space
  • Consider the type and availability of replacement cooling media
  • Choose a unit with a CFM rating at or above your calculated minimum

Make a Confident Choice

Choosing the right evaporative cooler comes down to matching the unit's capacity to your space, understanding your local climate, and planning for proper ventilation. Take the time to calculate your CFM needs and consider the type of installation that best fits your situation.

If you have questions about which Staycool Products cooler is right for your application, our support team is available to help. Visit our Support Center or explore our full product lineup.